Following elements are integrated into the single removable unit:

1. Centerpost
2. Inboard first wall/shield, and stabilizer plates
3. Outboard blanket
4. Upper and lower divertor plates and ring manifolds
5. Upper and lower He-cooled divertor shield, and high temperature shield
6. Coolant manifolds of the both inboard shield and diverter plates
7. Lower water cooled divertor shield
8. Lower PF coil 1&2
9. All coolant ring headers locate at the bottom
10. Outboard TF shell at the bottom part.

TF System Configuration

Cutaway of ARIES-ST TF system

Power Core Configuration

Cutaway of ARIES-ST IB-shield/Divertor/Blanket

Cutaway of ARIES-ST power core

Cutaway of ARIES-ST components

The 3D drawings are now 70~75% complete. Need following infomation from people:

1. cross section and locations of new PF coils
2. new TF geometry if it is different from that of last project meeting
3. cross sections of TF leads
4. dimension of vacuum pumping duct; now eight of vacuum pumps are assumed

Area

1. Total divertor area=128 m²
2. Total first wall area=542 m²

OB-FW area=421.0 m²

IB-FW area=67.4 m²

W-surface area=53.6 m²

Mass

1. Total mass of removable unit=3911X10³Kg
2. Center post=851X10³Kg