P-4.1 Design of DED Divertor Target Plates
by M. Poier, T. Denner

P-4.2 Thermal Load on DED Target Plates
by T. Denner, M. Poier

P-4.3 Installation of a new W-shaped divertor in JT-60U
by K. Kodama,T. Sasajima, K. Masaki, N. Hosogane, S. Sakurai, M. Morimoto, Y. Miyo, H. Hiratsuka, N. Akino, S. Takahashi, K. Kishiya, Y. Neyatani, M. Saidoh

P-4.4 Closure of the Bypass Leakage Around the JET Divertor with Polymer Seals
by H. Altmann, P. Andrew

P-4.5 Degradation of Plasma Facing Materials Due to Severe Thermal Shocks
by M. Rodig, R. Duwe, J. Linke, R. H. Qian

P-4.6 Thermal Shock Behavior of Beryllium under imulation Load Tests by Laser Beam
by D.A. Davydov, V.A. Gorokhov, A.V. Laushkin, A.V. Tselishev, Yu.G. Kostuk

P-4.7 Material Response To Simulated Plasma Disruption Loads
by V.N. Litunovsky, V.E. Kuznetsov, I.B. Ovchinnikov, V.A. Titov

P-4.8 Thermal Cycling of Water-Cooled Divertor Mock-ups for ITER
by J. Linke, R. Duwe, M. Rodig, B. Wiechers

P-4.9 Fabrication and Installation of the DIII D Radiative Divertor Structures
by M.A. Hollerbach and J.P. Smith

P-4.10 3-D Thermo-Mechanical Modeling of the ITER Limiter Small Scale Specimen
by E. A. Mogahed and I. N. Sviatoslavsky

P-4.11 Development of Divertor High Heat Flux Components at JAERI
by S. Suzuki, T. Suzuki, K. Nakamura, M. Akiba

P-4.12 ITER Divertor Cassette and PFC Attachment Structural Design
by T. M. Hellwig

P-4.13 A Micro-Channel Concept for Cooling High-Heat-Flux Components
by M. Z. Hasan, M. Monde, Y. Mitsutake

P-4.14 Time-to-burnout Data from Simulated Loss of Flow Accidents at ITER-relevant Inlet Conditions
by T. D. Marshall, R. D. Watson, L. C. Cadwallader, K. P. Troncosa, K. A. Shaw, and J. M. McDonald